Find Solenoid Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Others > Solenoid Valve

Basic Info

Model No.:  PU01-15

Product Description

Model NO.: PU01-15 Application: Industrial Usage Products Name: PU01-15 GENERAL PURPOSE
1. 2/2-way,normally closed,force pilot;
2. DN 15mm,PN 0-10bar,NPT 1/2";
3. IP65 coil,grade H;
4. Brass body,SS304 plunger,

pattern:Two-port two-position
principium:force pilot-acting
control modenormally closed
valve body: brass
seal material: NBR:≤80
EPDM: ≤120
FKM: ≤150
working pressure: 0-10 bar
Max pressure:16 bar
voltage: AC220V AC110V 50/60HZ DC12V DC24V
mediumairwaterhot wateroil ect.
application:Low-pressure large-flow air water control system

Contact us if you need more details on Solenoid Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Solenoid Valve、Solenoid Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
  • Cooling solenoid valve failure causes and troubleshooting

    Refrigeration solenoid valve common fault phenomenon and troubleshooting: Symptom: solenoid valve does not work after troubleshooting Remedy: Check the power wiring is not good → re-wiring and connector connection, check the power supply voltage is within ± working range - → transferred to the normal position Range, the...

  • ASCO solenoid valve fault repair methods

    There are a number of potential causes for ASCO solenoid failures, so they are considered complex and prone to failure. In fact, they are very simple and very reliable. Many problems are caused by something other than the valve, while others are due to misapplication or incorrect installation. ASCO solenoid valves should be...

  • Solenoid valve works and classification

    Solenoid valve is used to control the fluid of the basic components of automation, are actuators; is not limited to hydraulic, pneumatic. Solenoid valve used to control the direction of hydraulic flow, the factory's mechanical devices are generally controlled by the hydraulic steel, it will use the solenoid valve. How...

  • Composition and application of solenoid valve connector

    First, the composition of the solenoid valve connector consists of a plug and socket, the plug is square, square and round socket. Second, the basic technical parameters 1, the plug parameters: Pin number 2 + PE / 3 + PE Locking method Central screw connection Screw connection section mm2 0.34mm2 (min, AWG22) Cable diameter...

Product Categories : Others

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters